Brand Name:
Triple X Race Co
Manufacturer Part Number: SC-CH-0100
Manufacturer Part Number: SC-CH-0100
Triple X Sprint Car Complete Grade 8 Bolt Kit - SC-CH-0100
Triple X Sprint Car Complete Grade 8 Bolt Kit - SC-CH-0100
Brand: Triple X Race Co. |
Description
Triple X Sprint Car Complete Grade 8 Bolt Kit - SC-CH-0100
Includes everything you need to put together your Triple X Sprint Car. Packaged separately so you know exactly where they go and complete with a list of all of its contents. Each package is marked with its location and extra nuts and washers are provided. All Bolts are Grade 8 with Nylock Thin Nuts and AN Washers.
Included:
(Bolt - Qty - Size)
- Brake Pedal to Car - 1 - 3/8 x 24 x 2"
- Front Motor Mount to Chassis - 2 - 3/8 x 24 x 1"
- Rear Wing Tee to Wing - 2 - 3/8 x 24 x 1 3/4"
- Rear Wing Tee to Chassis - 2 - 3/8 x 24 x 1 3/4"
- Power Steering Bracket to Motorplate - 2 - 3/8 x 16 x 1" SCS
- Steering Clamp on Chassis - 2 - 3/8 x 24 x 1"
- Left Front Brake Caliper to Front End - 2 - 3/8 x 24 x 1"
- Upper Motorplate to Block - 2 - 3/8 x 16 x 1 1/2"
- Watts Link Straps to Watts Link - 2 - 3/8 x 24 x 2"
- Rear Motor Plate to Block - 4 - 3/8 x 16 x 1 1/4" SCS
- Motorplate to Chassis - 4 - 3/8 x 24 x 2 1/2"
- Torque Ball Housing to Motorplate - 6 - 3/8 x 16 x 1" SCS
- Throttle Pedal to Throttle Rod - 1 - 10/32 x 5/8" SCS
- Motorplate to Floorpan - 4 - 10/32 x 3 /4" SCS
- Nerfs, Bumpers and Torque Tube - 16 - 10/32 x 1 1/2" SSCS
- Pitman Arm to Drag Link - 1 - 1/2 x 20 x 2"
- Tie Rod to Steering Arm R - 1 - 1/2 x 20 x 2"
- Tie Rod to Steering Arm L - 1 - 1/2 x 20 x 1 3/4"
- Drag Link to Steering Arm - 1 - 1/2 x 20 x 2"
- Upper Rear Shock to Chassis - 2 - 1/2 x 20 x 2 3/4"
- Upper Front Shock to Chassis - 2 - 1/2 x 20 x 3 1/2"
- Lower Front Shock to Axle - 2 - 1/2 x 20 x 1 1/2"
- Lower Rear Shock - 2 - 1/2 x 20 x 2 1/2"
- RF Steering Arm to Spindle - 2 - 1/2 x 20 x 1 3/4"
- Radius Rod to Axle - 3 - 1/2 x 20 x 1 1/4"
- Radius Rod to Chassis - 6 - 1/2 x 20 x 2 3/4"
- Wing Cylinder to Chassis - 1 - 1/4 x 28 x 1"
- Upper Steering Bracket to Chassis - 2 - 1/4 x 28 x 1 3/4"
- Bell Crank to Chassis - 1 - 1/4 x 28 x 1 3/4"
- Wing Valve to Chassis - 2 - 1/4 x 20 x 3/8"
- Front Posts to Front Wing - 4 - 1/4 x 28 x 1"
- Wing Cylinder to Wing Tee - 1 - 5/16 x 24 x 1"
- Master Cylinder to Pedal - 1 - 5/16 x 24 x 2 1/4"
- Throttle Pedal to Chassis - 1 - 5/16 x 24 Nut
- Rear Front Wing - 2 - 5/16 x 24 x 1 1/4"
- 1/2 Box Steering Bracket to Chassis - 2 - 5/16 x 24 x 1
- Master Cylinder to Chassis - 2 - 5/16 x 24 x 2 1/2"
- Pinch Clamps - 4 - 5/16 x 24 x 1 1/2"
- Tank to Chassis - 4 - 5/16 x 18 x 7/8" SCS
- Watts Link to Birdcage - 1 - Pin (1/2 x 1 1/2") and Clip
- Torque Tube Stud Kit - 1 - 6 Studs, Washers and Nuts
- Rear Arm Spacers - 2 - 1/2" ID x 3/4" OD Cone
- Watts Link to Chassis - 2 - Pin (3/8 x 4"), Clip and Spring
- Rear Caliper to Rear End - 2 - 7/16 x 14 x 1 1/2"
(Nut - Qty - Size)
- 10/32 Nylock 1/2 Nuts - 5 - 10/32"
- 1/4" Nylock 1/2 Nuts - 10 - 1/4"
- 5/16" Nylock 1/2 Nuts - 12 - 5/16"
- 3/8" Nylock 1/2 Nuts - 12 - 3/8"
- 1/2" Nylock 1/2 Nuts - 22 - 1/2"
(Washer - Qty - Size)
- 1/4" AN Washers - 5 - 1/4"
- 5/16" AN Washers - 15 - 5/16"
- 3/8" AN Washers - 35 - 3/8"
- 7/16" AN Washers - 2 - 7/16"
- 1/2" AN Washers - 10 - 1/2"